CH150 CH200 CH300 Cylinder Honing machine
ENGINE REBUILDING - CYLINDER BLOCK
|
|
|
| -Settin-up fixtures for blocks with height and inclination adjustment to allow an easy and rapid positioning of "V" engine blocks. -Alternative syncronized movement stopping with rotary motion avoiding damage on cross finishing. -Universal fixture lifting electrical device. -Longitunidal head movement to assure clamping of engine block without any positioning.
-Quick clamping to allow a simple and efficient fastening of the engine block. |
|
TECHNICAL SPECIFICATIONS
| CH150 | CH200 | CH300 | |
| WORKING CAPACITY | |||
| Honing capacity | 25-180 mm | 25-200 mm | 25-300 mm |
| Max. honing depth | 350 mm | 350 mm | 550 mm |
| stroke of the honer | 300 mm | 300 mm | 500 mm |
| Max. length admitted for the block | 1420 mm | 1420 mm | 1600 mm |
| Max wrokpiece height | 600 mm | 600 mm | 700 mm |
| SPEEDS AND FEEDS | |||
| Spindle rotation speed | 120-320 mm | 90-300 RPM | 90-300 RPM |
| Spindle reciprocating speed (steplessly variable) | 0-20 mm/min | 0-20 mm/min | 0-20 mm/min |
| Max table inclination | - | +- 45° | +- 45° |
| Max head longitudinal travel | 1100 mm | 1100 mm | 1250 mm |
| Max head trasversal travel | 105 mm | 105 mm | 105 mm |
| MOTOR RATINGS | |||
| Spindle rotation motor | 1,1 KW | 1,1 KW | 1,1 KW |
| Hydraulic system motor | 1,1 KW | 1,1 KW | 1,1 KW |
| Standard cooling system motor | 0,16 KW | 0,16 KW | 0,16 KW |
| TANKS CAPACITY | |||
| Coolant tank | 75 l | 120 l | 160 l |
| Hydraulic system tank | 60 l | 50 l | 50 l |
CH150
CH150
Standard equipment
Oil-hydraulic system
Pneumatic system for head displacement over air cushion
Coolant system
Device for expansion and of honing stones during work phase
Fastening plates (4 pieces)
Parallel supports (2 pairs 300x570 and 120x570)
Service tools
Operating manual
Recommended equipment
AZ573S Equipment for honing from 44 to 68mm. diameter
AZ574 Equipment for honing from 63,5 to 177mm
Optional equipment
ECH1501 Electrical panel for CH150 conforming CEI UNI 60204
AZ703 Inner gauge capacity from 30 to 100mm. with centesimal dial gauge
AZ704 Inner gauge capacity from 50 to 178mm. with centesimal dial gauge
AZ705 Inner gauge capacity from 100 to 300 mm with centesimal dial gauge
AZ571 Equipment for honing from 25 to 33 mm dia.
AZ572 Equipment for honing from 38 to 56 mm dia.
CH200
CH200
Standard equipment
Universal clamping device for blocks
Hydraulic system
Coolant system
Device for expansion and of honing stones during work phase
Electrical lifting device for rollover fixture
N. 2 Set of supports
Rollover fixture with No. 1 set of support
Low voltage electric controls ( 24 V)
Cylinder block quick clamps
Service tools
Operating manual
Recommended equipment
AZ573S Equipment for honing from 44 to 68mm. diameter
AZ574 Equipment for honing from 63,5 to 177mm
AZ576 Equipment for honing from 63,5 to 228mm. diameter (for CH200-300)
Optional equipment
AZ703 Inner gauge capacity from 30 to 100mm. with centesimal dial gauge
AZ704 Inner gauge capacity from 50 to 178mm. with centesimal dial gauge
AZ705 Inner gauge capacity from 100 to 300 mm with centesimal dial gauge
AZ571 Equipment for honing from 25 to 33 mm dia.
AZ572 Equipment for honing from 38 to 56 mm dia.
AZ575 Stones and support from 220 to 304 mm for AZ576
AZ782 Automatic expansion feed with a number of stroke pre-setting, display of the taper of cylinder automatic shut off
to the target dimension
CH300
CH200
Standard equipment
Universal clamping device for blocks
Hydraulic system
Coolant system
Device for expansion and of honing stones during work phase
Electrical lifting device for rollover fixture
N. 2 Set of supports
Rollover fixture with No. 1 set of support
Low voltage electric controls ( 24 V)
Cylinder block quick clamps
Service tools
Operating manual
Recommended equipment
AZ573S Equipment for honing from 44 to 68mm. diameter
AZ574 Equipment for honing from 63,5 to 177mm
AZ576 Equipment for honing from 63,5 to 228mm. diameter (for CH200-300)
Optional equipment
AZ703 Inner gauge capacity from 30 to 100mm. with centesimal dial gauge
AZ704 Inner gauge capacity from 50 to 178mm. with centesimal dial gauge
AZ705 Inner gauge capacity from 100 to 300 mm with centesimal dial gauge
AZ571 Equipment for honing from 25 to 33 mm dia.
AZ572 Equipment for honing from 38 to 56 mm dia.
AZ575 Stones and support from 220 to 304 mm for AZ576
AZ782 Automatic expansion feed with a number of stroke pre-setting, display of the taper of cylinder automatic shut off
to the target dimension
 CH | [CH Cylinder Honing machines] | 607 Kb | 13/12/10 11:00 |
