SP1300-SP1600Y Rectificadora de Superficies Planas
ENGINE REBUILDING - CYLINDER HEAD
|
HYDRAULIC VERSION |
PLC VERSION |
||||||
|
- Head movement with ball screw system
|
Variable speed - Automatic and programmable working cycle - Head movement with ball screw system -Table movement with ball screw system |
||||||
SPECIFICATIONS
Version M
| SP1300M | SP1600M | |
| WORKING CAPACITY | ||
| Max. automatic table traverse | 1300 mm | 1600 mm |
| Max. grinding width | 340 mm | 410 mm |
| GEOMETRIC FEATURES | ||
| Useful table surface | 1100x340 mm | 1400x410 mm |
| Min. and max. height table to wheel | 0-740 mm | 0-850 mm |
| Distance from column to wheel axis |
260 mm | 260 mm |
| Segmental wheel diameter | 350 mm | 420 mm |
| CBN milling head (optional) | 350 mm | 420 mm |
| SPEEDS AND FEEDS | ||
| Grinding wheel rotation speed | 700-1400 RPM | 700-1400 RPM |
| Milling rotation speed (optional) | 200-400 RPM | 200-400 RPM |
| Rapid wheelhead feed speed, per minute | 1000 mm/min | 1000 mm/min |
| Min. and max. table traverse feed speed, per minute | 0-2400 mm/min |
0-2400 mm/min |
| MOTOR POWER | ||
| Grinding and single-point cutting tool spindle | 3,75 KW | 3,75 KW |
| Milling cutter spindle | 0,75 KW | 0,75 KW |
| Rapid vertical wheelhead traverse | 0.5 Kw |
3.4 Nm |
| Electric coolant pump | 0.12 KW | 0.12 KW |
| |
||
| Version Y | ||
| Min. and max. table traverse feed speed, per minute | 0-4650 mm/min | 0-4650 mm/min |
| Hydraulic system | 0.4 Kw | 0.4 Kw |
| Version PLC | ||
| Head movement | 3.4 Nm | 3.4 Nm |
| Table movement | 0.25 Kw | 0.25 Kw |
EQUIPMENT
STANDARD EQUIPMENT
-Low voltage electric controls (24V)
-Hydraulic system (only Y version)
-Head movement with ball screw system (Y version )
-Quick up and down of grinding head
-Coolant system
-Grindwheel dresser
-Edge clamp (4 pieces)
-Toe clamp ( 4 pieces )
-Grinding wheel: 350 mm. dia. for SP1300 - 420 mm. dia. for SP1600 - 450 mm. dia. for SP2000 with 10 grinding segments-Grindwheel hub puller
-Toolholder with carbide tool
-Pair of parallel supports:135x420 cm (SP1300-SP1600)
120x570 cm (SP2000)(11)
-Service tools
-Operating manual
PLC version
- Variable speeds, works and automatic cycle controlled by PLC
- Variable speed on the table movement, on the head movement, on the grinding wheel rotation
- Table and head movement with ball screw system
- Automatic down feed with PLC
OPTIONAL EQUIPMENT
-Safety guard kit including sliding doors conforming to CE standard: AZ230 (SP1300) - AZ231 (SP1600) - AZ236 (SP2000)
-Variable speed of grinding wheel:(Y version): AZ849 (SP1400-SP1600) - AZ848 (SP2000) - AZ411 Diamond and rest 0,40 kt
-CBN milling head assembly (with 2 CBN inserts for fast milling included) : AZ867 (SP1300) - AZ871 (SP1600) - AZ874 (SP2000)
-AZ851 Automatic down feed (Y version) (in PLC version is controlled by PLC)
-AZ232 Plc Automatic working-cycle, including present of numbers of working travel, spark out, return to start position. (Y version)
-AZ852 Flywheel grinding device with flaring cup grindwheel
-AZ853 Motor-driven rotary table dia. 390 mm
-AZ857 Device for speed 200 and 400 RPM of grinding wheel
- V-engine fixture: AZ700 (SP1300-SP1600) - AZ601 (SP2000) - AZ850 Magnetic cleaner
RECOMMENDED EQUIPMENT
- AZ390 Grinding coolant (5 liters)
- AZ698 Universal support for heads
 SP PLC-Y-M | [SP Surface Grinding and Milling machines] | 2363 Kb | 30/05/11 15:08 |
