SM10G-M Rectificadoras de Superficies Planas
ENGINE REBUILDING - CYLINDER HEAD
|
|
|
| Electrically Driven Traversing Table with a variable speed table traverse and infinite speed control in each direction. 24” between table and cutter plate. Roll over a 440 Chrysler block easily. Power head traverse quickly positions head and eliminates operator fatigue. Rigid cast iron base and table incorporate flat and v-way design for maximum accuracy and life. Precision ball lead screw increases sensitivity, accuracy, repeatability. CBN milling, grinding or combination machines offer extreme versatility. 13.5” Milling head with dual CBN Cutters. Cast Iron “box” type columns with dovetail ways extend durability and precision. |
|
SPECIFICATIONS
| SM10G | SM10M | |
| WORKING CAPACITY | ||
| Max. automatic table traverse | 1030 mm | 1030 mm |
| Vertical wheelhead traverse | 370 mm | 370 mm |
| Max. grinding width | 340 mm | 340 mm |
| Max. milling width with cutting tool | 340 mm | 340 mm |
| GEOMETRIC FEATURES | ||
| Useful table surface | 850x340 mm | 850x340 mm |
| Min. and max. height table to wheel | 105-475 mm | 105-475 mm |
| Min. and max. height table to tool or milling cutter | 105-475 mm | 105-475 mm |
| Distance from column to table C/L | 250 mm | 250 mm |
| Segmental wheel diameter | 350 mm | 350 mm |
| CBN milling head (optional) | 350 mm | 350 mm |
| SPEEDS AND FEEDS | ||
| Grinding wheel rotation speed | 700-1400 RPM | 700-1400 RPM |
| Milling rotation speed (optional) | - | - |
| Rapid wheelhead feed speed, per minute | 1000 mm/min | 1000 mm/min |
| Min. and max. table traverse feed speed, per minute | 0-1650 mm/min (elettromeccanica) | 0-1650 mm/min (elettromeccanica) |
| MOTOR POWER | ||
| Grinding and single-point cutting tool spindle | 3,75 KW | 3,75 KW |
| Milling cutter spindle | 0,75 KW | 0,75 KW |
| Rapid vertical wheelhead traverse | 0,18 KW | 0,18 KW |
| Hydraulic system | - | - |
| Electric coolant pump | 0,12 KW | 0,12 KW |
SM10M
Standard equipment
Electric controls 24V
Motorized raise and downfall of the head
Re-circulating ball screw drive on table
Holder to support dual CBN (complete with CBN inserts)
Micrometric control of downfeed wheelhead
Pair of parallel supports 135x350 mm
Extractor for CBN toolholder
Edge clamp (4 pieces) and Toe clamp ( 4 pieces )
Service tools
Operating manual
Recommended equipment
AZ698 Universal support for heads
Optional equipment
AZ244 System conforming to CE standard (SM10)
AZ700 V-engine fixture
Diamond for micrometric diamond dresser
SM10G
Standard equipment
Re-circulating ball screw drive on table
Electric controls 24V
Motorized lifting and downfall of the head
Toolholder with tool included
Micrometric control of downfeed
Pair of parallel supports 135x350 mm
Edge clamp (4 pieces) and Toe clamp ( 4 pieces )
Coolant unit
Grinding wheel extractor
Wheel dressing unit
Diamond dresser with diamond included
Service tools
Operating manual
Recommended equipment
AZ698 Universal support for heads
Optional equipment
AZ244 System conforming to CE standard (SM10)
AZ700 V-engine fixture
AZ867 Supporto portautensile a doppio inserto CBN (completo con inserti CBN)
 SM | [SM Surface Grinding and Milling machines] | 574 Kb | 27/06/11 15:24 |
